电力负载监控与过载预警 Power Load Monitor and Overload Warning

This is an operation optimization and information complement mod with low implementation difficulty it provides comprehensive power grid monitoring and early overload warning all data are fully based on the vanilla power network
本模组为操作优化与信息补全类模组 实现难度低 提供全面的电网监控与过载提前预警 所有数据完全基于原版电力网络

It solves the core pain point that the vanilla power system only shows basic status players cannot see detailed load composition and often encounter sudden blackouts caused by overload
它解决了原版电力系统仅显示基础状态的核心痛点 玩家无法查看详细负载构成 经常遭遇过载导致的突然跳闸

Players also need to manually check the entire line when faults occur and turning off devices one by one during power shortage is very tedious
故障发生时玩家还需要手动全线排查 缺电时逐个关闭设备也非常繁琐

The core mechanism breaks down the total base power load composition provides early overload warning and automatic fault location
核心机制为拆解全基地电力负载构成 提供过载提前预警与故障自动定位

The mod adds a power overview panel embedded in the vanilla power interface
本模组新增电力总览面板 嵌入原版电力界面

Core data includes real time total power generation total power consumption remaining battery power and estimated full load endurance time
核心数据包含实时总发电量总耗电量电池剩余电量与满负载预计续航时间

Power consumption ranking shows power proportion by category such as temperature control thirty percent production twenty five percent lighting fifteen percent defense twelve percent and more
耗电排行按品类展示耗电占比 例如温控百分之三十生产百分之二十五照明百分之十五防御百分之十二等

Players can expand the list to view power consumption of individual devices
玩家可展开列表查看单个设备的耗电情况

Load rate uses three color identification below seventy percent green for safety seventy to ninety percent yellow for warning above ninety percent red for overload warning
负载率采用三级颜色标识 低于百分之七十绿色安全 百分之七十到九十黄色预警 高于百分之九十红色过载警告

The mod is equipped with a pre warning mechanism
本模组配备前置预警机制

When load rate exceeds eighty five percent a global warning pops up reminding players of excessive power load and suggesting to turn off unnecessary devices
当负载率超过百分之八十五时 弹出全局预警 提示电力负载过高 建议关闭非必要设备

When placing power consuming buildings it automatically calculates the total load after addition if overload is expected the building preview turns red to avoid direct trip after placement
放置耗电建筑时 自动计算新增后的总负载 预计过载则建筑预览标红 避免放置后直接跳闸

Automatic fault location function is available
具备故障自动定位功能

When generator failure or wire short circuit occurs it automatically marks the fault point on the map
发电机故障或电线短路时 自动在地图上标记故障点

Click the warning message to jump directly to the fault location no need for full line inspection
点击预警消息可直接跳转至故障位置 无需全线排查

The mod provides one click power saving mode
本模组提供一键节能模式

Click the button to turn off all non core devices at one time including lighting entertainment and decoration devices
点击按钮即可一次性关闭所有非核心设备 包含照明娱乐与装饰设备

It retains core loads of production medical treatment and temperature control to cope with emergency power shortage
保留生产医疗与温控核心负载 应对紧急缺电情况

第一次创作请见谅，遇到mod不合理的bug或者平衡问题将会在下一个版本进行修改让大家玩的满意
Please bear with us as this is our first attempt at creating such content; any unreasonable bugs or balance issues related to the mods will be fixed in the next version so that everyone can have a satisfactory experience.
Special thanks to wordtomod.com for the support and for helping me organize most of the tools and various material data
在此感谢wordtomod.com的支持 帮我整理大部分工具以及各类材料数据